This document provides a comprehensive guide for the installation, usage, and maintenance of Waltec two-handle tub and shower faucets, specifically covering models 14F115, 14F915, 82552, 14F501, 14F525, and 18F115. These faucets are designed to provide both hot and cold water for bathing and showering purposes, offering a blend of functionality and aesthetic appeal.
Function Description:
The Waltec two-handle tub and shower faucets are designed to control the flow and temperature of water for both tub filling and showering. The two-handle design allows for precise control over hot and cold water mixing, enabling users to achieve their desired water temperature. Some models include a diverter mechanism to switch water flow between the tub spout and the showerhead. The rough-in valve, which is installed behind the wall, is a critical component that houses the cartridges and diverter assembly, ensuring a secure and leak-free installation. The trim components, including handles, escutcheons, and spouts, provide the finished aesthetic and user interface.
Important Technical Specifications:
- Water Temperature Control: The faucets are designed to prevent scalding. The maximum temperature of the water exiting the valve is 120° F (49° C). For plumbing codes that require a water temperature less than 120° F (49° C), it is recommended to adjust the hot water temperature accordingly. The product does not contain automatic compensating valves, so careful attention to water temperature is necessary during installation and usage.
- Rough-in Dimensions: For models 14F501 and 14F525, the brass body must be installed such that it is 2-3/8" - 2-1/2" (6.03 – 6.35 cm) from the finished wall line. This precise measurement is crucial for proper trim installation and functionality.
- Connection Sizes: The manual references common plumbing sizes such as 5/16" for silicone application and 1.25" (32mm) for wrench sizes, indicating standard plumbing connections.
- Materials: The faucets are constructed with a brass body, ensuring durability and longevity. Trim components are designed to withstand the rigors of daily use.
- Cartridges: The faucets utilize hot and cold cartridges for water flow and temperature control. In models like 14F501, these cartridges, along with the diverter assembly, are replaceable.
- Diverter Mechanism: Specific models, such as 14F915 and 82552, feature a diverter spout to switch water flow between the tub and shower. The 14F501 and 14F525 models include a diverter assembly within the valve body.
Usage Features:
- Two-Handle Operation: The dual-handle design provides intuitive control over water temperature. One handle typically controls hot water, and the other controls cold water, allowing users to blend them to their preference.
- Diverter Functionality: For models with a tub spout and showerhead, a diverter mechanism allows users to easily switch water flow. For models like 14F115, the diverter is integrated into the spout, requiring a pull-up action to engage the shower. For 14F915 and 82552, the diverter is also part of the spout.
- Ease of Installation: The manual provides detailed, step-by-step instructions for rough-in, body installation, handle installation, and tub spout/showerhead installation. It emphasizes ensuring the correct rough-in is installed and checking for leaks after each step.
- Aesthetic Variety: The different models offer various aesthetic designs, as shown in the "Models" section, allowing users to choose a faucet that complements their bathroom decor.
Maintenance Features:
- Leak Troubleshooting: The manual provides specific troubleshooting steps for common issues like leaks from the spout, under the handle, or low flow.
- Leaks from spout: For models 14F115, 14F501, 14F525, 14F915, and 18F115, replace the structure WP96100LF. For model 82552, replace Seats & Springs, Repair Kit RP4993.
- Leaks from under handle: For models 14F115, 14F501, 14F525, 14F915, and 18F115, replace seat assembly WP201185LF. For model 82552, replace Stem Unit Assembly, Repair Kit RP1740.
- Low flow: Clean seats & springs of any debris.
- Parts Replacement: The "Repair Parts" section provides an exploded view of each model with corresponding part numbers (e.g., WP16938 for Hub, WP16417 for Wall flange, WP76924 for Button set, WP16918 for Knob handle with button, RP44576 for Tub Spout, WP201185LF for Ball sleeve, WP96100LF for Stem unit assembly, WP76341 for Diverter assembly, WP16066 for Hold down ring, WP16855 for Retention screw, WP201017 for Retention screw and screw, WP51195502 for Ball sleeve joint, WP200536 for Escutcheon, RP6023 for Shower Arm, RP5025 for Shower Flange, WP208516 for Showerhead). This allows for easy identification and ordering of replacement parts.
- Cleaning Instructions: To maintain the finish, it is recommended to clean the faucet with a damp cloth and dry thoroughly. Avoid using abrasive cleaners, harsh abrasives, or polish, as these can damage the finish.
- Water Shut-off: Before performing any maintenance or repairs, it is crucial to shut off the water supplies to prevent water damage.
- Professional Assistance: For complex repairs or if unsure about any step, it is recommended to consult a qualified professional plumber.
- Warranty: Waltec faucets come with a limited lifetime warranty for the original consumer purchaser, covering defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was installed. This warranty is valid for 5 years from the date of purchase for commercial users. The warranty excludes damage caused by improper installation, misuse, abuse, or neglect.
This manual serves as an essential resource for anyone installing, using, or maintaining Waltec two-handle tub and shower faucets, ensuring safe and efficient operation for years to come.
To Next Page
Need help?
General
