The Catacombs is an advanced time based
multi effect pedal with six individual Delay
programs and fi ve Reverb programs allowing a
staggering thirty different base combinations.
The Catacombs is a full-featured, small-footprint
stomp box that is programmable, preset
capable, true stereo, offers enhanced MIDI
control, and has an expression input that you
can assign to ANY of the parameters.
The Catacombs features the most advanced
iteration of our user friendly interface to date
allowing you to dial in your sound without
endless menus on a tiny display. Use the
intuitive design to effortlessly navigate through
the range of Delay and Reverb programs.
The Catacombs offers complete control over
every program via either MIDI CC Messages
or PC Commands. It can accept a global clock
signal from a MIDI controller. By default the
pedal is set to ‘omni channel’ mode meaning
it will accept a MIDI command on any channel.
The pedal also accepts remote switching via TRS
and both channels can be split and controlled.
For a complete guide to the advanced features
and a full MIDI reference, download the full
manual from: wamplerpedals.com/downloads
The Catacombs can be run in either Mono or
Stereo using 2-4 guitar cables. The optimum
connection for this pedal will always be after
your gain stages, so either in the effects loop of
a guitar amplifi er or into the front input of your
amplifi er after your gain pedals.
POWER
Connect a 9V DC Center Negative Power supply
suitable for guitar pedals only, Current draw
is approx 130mA. DO NOT EXCEED 9V - This
pedal cannot be run at 18V. Use of an incorrect
power adapter can lead to damage and void the
warranty on the pedal.
SCAN ME TO
DOWNLOAD
FULL MANUAL:
To Previous Page
Loading...
