Wanbo X5 - Installation and Adjustment; Powering On and Off; Focal Length Adjustment; Mounting the Projector

6
Installation and Adjustment
Powering On and Off
To power on the projector, either press the power button on the projector, or point the
remote control to the projector and press the power button.
To power off the projector, short press the power button on the projector, or point the
remote control to the projector and press the power button. Once shutdown prompt box
appears, short press the same button again.
Focal Length Adjustment
When the picture image is blurred, adjust the lens focus by using the rotation buttons on
the remote control.
Mounting the Projector
Remove the four pads.
Adjust holder angle to align with the
holes and then tighten the screws.
Fix the holder.