OLP-5, OLP-6, OLP-8 3-1
3 Preparing for Operation
3.1 Unpacking the device
Packing material
We suggest that you keep the original packing
material. It is designed for reuse (unless it is
damaged in transit). Using the original packing
material is your guarantee of protecting the
device during transit.
Checking the package contents
Your level meter is shipped with the following
accessories:
• 2.5 mm universal adapter (installed on
device)
• Belt carrying bag
• Manual
Checking for damages in transit
After you unpack the device, check to see
whether it was damaged in transit. This is
particularly likely if the packaging is clearly
damaged. If there is damage, do not attempt to
operate the device. Doing so can cause further
damage.
Recovery following storage and
transport
Condensation can occur if a device that is stored
or transported at a low temperature is brought
into a warm room. To avoid damages, wait until
To Next Page
Loading...
Need help?
General
