OLP-5, OLP-6, OLP-8 1-1
1 Description
1.1 Features and applications
1.1.1 Common features
The handheld OLP-5, OLP-6 and OLP-8 Optical
Power Meters measure power levels on fiber
optical systems. These battery-powered devices
are ideal for use in installing and maintaining
LAN, TELECOM and CATV systems.
The OLP-5 and OLP-6 power meters can connect
to single-mode and multimode fibers with a max.
core diameter of 100 µm. The OLP-8 works only
with single-mode fibers having a core diameter of
9µm.
Tests on systems from different manufacturers
with different connector types are easy to handle
due to the UPP adapter for 2.5 mm ferrules.
To measure attenuation, a suitable optical source
is required. The OLS-5 LED Source and the
OLS-6 Laser Source from Wandel & Goltermann
are ideal for this application.
Both modulated and unmodulated light signals
can be measured. For modulated light signals,
the average power is displayed for system
signals and signals with standard fixed
frequencies of 270 Hz, 330 Hz, 1 kHz and 2 kHz.
The modulated signal mode with different fixed
frequencies can be used to identify fibers in a
fiber bundle, for example.
To Next Page
Loading...
Need help?
General
