Wandel & Goltermann OLP-6 User Manual

OLP-5, OLP-6, OLP-8 3-7
Connecting the test cable, Fig. 3-5
To access the test port, open the cover on the
front side:
1. Swing open the cover to the left.
You can now access the test port underneath.
2. Remove the protective cap from the
connector (A) on the test cable.
3. Slide the ferrule (B) all the way into the
universal adapter (C).
The test connection is now ready.
Notice: To avoid shifting the position of the fiber
with respect to the photodiode (D)
during measurements, avoid jerky
movements and do not pull on the
cable.

Wandel & Goltermann OLP-6 Specifications

General

Brand	Wandel & Goltermann
Model	OLP-6
Category	Measuring Instruments
Language	English