Page 5
camping a nd outdoors
INSTALLATION GUIDE LOCATION
SETUP
· The air conditioner should be placed on a flat floor and dry place to minimise noise and vibration.
1. Open the package, take out the air conditioner and let the unit stand for 2 hours before turning
it on again.1.
2. Screw the exhaust pipe to the rear air outlet (as shown).
3. Remove the end cap from the drain hole. Insert the drain pipe into the drain hole at the back of
the air conditioner. Keep the drain pipe straight to avoid clogging.3.
· For safe and secure positioning, place the air conditioner on a smooth, level floor strong enough
to support the unit.·
· Always use the air conditioner on a flat surface.
· Allow more than 50cm of space around the unit for efficient air-conditioning.
· Never place any obstacle around the air inlet or outlet of the air conditioner.
End Cap
To Next Page
Loading...