W&T 58631 - Page 5

5
W&T
Subject to error and alteration
5.3 Interface for the OEM-Com-Server 58431 56
5.4 Option: 20mA interface 58
5.5 Interfaces for the OEM-Com-Server 58432 60
5.5 LED displays 63
6 Configuration access to the Com-Server 65
6.1 Configuration menu structure 66
6.2 Configuration via Telnet 68
6.3 Configuration via Browser - Web Based Management 71
6.3.1 Activating WBM with the WuTility-Tool 71
7 The basis configuration of the Com-Server 77
7.1 Saving your settings 78
7.2 Menu: INFO System 79
7.3 Menu: SETUP System 80
7.3.1 Menu: SETUP System r Setup TCP/IP 80
7.3.2 Menu: SETUP System r Telnet Password 83
7.3.3 Menu: SETUP System r System Password 84
7.3.4 Menu: SETUP System r System Name 85
7.3.5 Menu: SETUP System r Flash Update 85
7.3.6 Menu: SETUP System r Factory Defaults 86
7.3.7 Menu: SETUP System r Reset 86
7.4 Menu ... r TCP/IP Mode r System Options 87
8 Configuration of the serial port 89
8.1 The serial parameters (Menu: UART Setup) 90
8.1.1 Baud rate, Data bits, stop bits, parity 90
8.1.2 The handshake modes 91
8.1.3 FIFO Send/Rec 96
9 The protocol stack of the Com-Server 97
9.1 Services of the Com-Server 98
9.2 Addressing in the TCP/IP Network 99
9.3 The protocol stack of the Com-Server 100
9.3 1 Data transfer per TCP/IP and UDP/IP sockets 100
10 Data transfer per TCP/IP sockets 103
10.1 The Com-Server as TCP server 104
10.1.1 Configuration of the local port number 104
10.1.2 Optional settings 105