Need help?Do you have a question about the Wangen KL 50 Series and is the answer not in the manual?
General| Brand | Wangen |
|---|---|
| Model | KL 50 Series |
| Category | Water Pump |
| Language | English |
Key safety instructions and warnings for installation and start-up.
Requirements and qualifications for personnel performing mechanical and electrical work.
General safety warnings for operation, maintenance, inspection, and assembly.
Specifies the intended industrial applications and usage limitations for the pumps.
Details on common ways the pump can be misused and the potential consequences.
Information on pressure limits, operational constraints, and potential damages.
Specific safety precautions for hopper pumps and openable housing designs.
Specific safety precautions for immersion pump types.
Safety guidelines for pumps equipped with a heating jacket.
Detailed overview of WANGEN helical progressing cavity pump technology and compliance.
Importance of maintaining correct pump rotation direction for preventing damage.
Guidelines for correctly dimensioning and connecting piping to the pump.
Specifies the maximum allowable pressure within the pump's suction/hopper casing.
Instructions and safety precautions for connecting the pump's electrical system.
Steps and precautions for setting up the pump for initial commissioning.
Safety instructions for operating pumps in potentially explosive atmospheres (ATEX).
Checklist and steps for safely switching on the pump and drive unit.
Guidelines and precautions for operating the pump during normal use.
Procedure for safely shutting down the pump by de-energizing and closing valves.
Procedures for maintaining various types of shaft seals, including LWD cartridges.
Table listing common mechanical/hydrodynamic faults, causes, and remedies.
Information on troubleshooting electrical faults in the pump's drive system.
General safety precautions and procedures before disassembling or reassembling the pump.
Procedure for replacing the LWD cartridge shaft seal on KL 20 models.
Procedure for safely dismounting and removing the drive unit.
To Next Page
