Need help?Do you have a question about the Wangen XPRESS 48 and is the answer not in the manual?
General| Brand | Wangen |
|---|---|
| Model | XPRESS 48 |
| Category | Water Pump |
| Language | English |
Details the pump's overall construction, including key components and their numbering.
Explains how the progressive cavity pump operates to move fluids.
Lists available drive selections, performance specs, and seal options.
Explains the meaning of signal words (Danger, Warning, Caution, Hint) and their consequences.
Details the format for specific safety notes within chapters.
States that adherence to documentation is prerequisite for defect claims.
Excludes liability for damages due to non-observance of documentation.
Presents the EC Declaration of Conformity for the machine, referencing relevant directives.
Certifies that the delivered pump meets specified order requirements per EN 10204.
Provides detailed technical specifications, dimensions, and performance curves for the Xpress 48.
Provides detailed technical specifications, dimensions, and performance curves for the Xpress 64.
Defines qualified personnel for mechanical and electrical tasks, requiring specific training and knowledge.
Specifies that pumps are for industrial use and must be operated within documented limits.
Outlines procedures for inspecting deliveries, handling transport damage, and storing pumps.
Details requirements for pump installation, anchoring, and alignment to prevent damage.
Advises against dry running and highlights potential hazards during initial startup.
States the normal sound pressure level (<70dB(A)) assuming proper construction and operation.
Describes the pump's delivery condition and maximum net weight.
Instructs on attaching lifting accessories to the pump using designated points.
Details aligning the pump over piping, marking, and drilling for fasteners using a bubble level.
Provides step-by-step instructions for mechanical connections, including flange standards and torque.
Specifies voltage requirements (230/400V) and cautions about variations affecting property.
A checklist for initial pump startup, covering flange connections, installation, devices, and rotation.
A checklist for recommissioning a pump, including checking connections, installation, and devices.
Provides detailed instructions and safety precautions for disassembling and reassembling the pump's rotor and stator.
Offers step-by-step guidance and safety warnings for dismantling and reassembling the pump's seal unit.
A checklist for safely shutting down the pump, checking valves, and draining medium.
Guidelines for disposing of pump parts like housing, rotor, stator, and seals according to regulations.
Lists spare parts for the XPRESS 64 model, categorized by component type.
Details spare parts specifically for the XPRESS 64 pump housing, including part numbers.
Lists spare parts for the XPRESS 64 universal joint, with corresponding numbers and quantities.
Provides a parts list for the XPRESS 64 seal unit, including seals and casings.
Lists spare parts for the XPRESS 64 gland packing, such as O-rings and shaft sleeves.
To Next Page
