Need help?Do you have a question about the wanscam JW0009 and is the answer not in the manual?
General| Model | JW0009 |
|---|---|
| Category | IP Camera |
| Resolution | 1280 x 720 |
| Lens | 3.6mm |
| Viewing Angle | 60 degrees |
| Operating Temperature | -10°C to 50°C |
| Motion Detection | Yes |
| Pan/Tilt | No |
| Video Compression | H.264 |
| IR Distance | 10m |
| Night Vision | Yes |
| Connectivity | Wi-Fi |
| Power Supply | DC 5V |
| Audio | Two-way audio |
| Supported Protocols | TCP/IP, HTTP, FTP, DHCP, DNS, DDNS, NTP, UPnP |
| Compatibility | Android, iOS |
| Storage | MicroSD card slot, up to 64GB |
Install the antenna and connect the camera to the router and power supply.
Install ActiveX plugin and search tool from the CD for camera setup.
Use search tool to find camera IP and configure network settings like IP, Subnet, Gateway.
Select login mode: ActiveX, Server Push, No Plug-In, or SD Card Playback.
Scan for Wi-Fi signals, select SSID, and input password for wireless connection.
Configure Dynamic DNS service for remote access, ensuring DDNS Succeed status.
Set up email for receiving alarm notifications with attached photos.
Configure motion detection, sensitivity, and alarm trigger events.
Define path, file length, and disk space for video and photo storage.
Configure SD card recording, including coverage, time, and timer settings.
Install PC software and mobile apps (e-View7) for camera management.
To Next Page
