Wansview B4 User Manual

wans
2K Security Camera Outdoor
with Non-Stop Solar Power
Quick Installation Guide
Product Diagram
Antenna
Indicator Lights Status
Light Status Camera Status
Microphone
IR-Cut
Lens
Indicator Light
Photoresistor.
Power ON/OFF
Reset
TF Card Slot
Type-CPort
Speaker
What's in the Box
SolarPanel Power cable Battery Camera Mounting Screws'2 Base’2
Red light on Power On
Flashing red & blue lights Camerais ready to connect
Blue light flashing Camera s connecting WiFi
Blue light solid Succeed to connect Wii
Red Ut flashing auicky 1. Reset Camera to factory setting
2. Camera is upgrading firmware
Warm note: Please make sure your router is connected to Internet,
User's Guide
1. Download and Install
Goto the App Store or Google Play to search and download the "Wansview Cloud” APP
on your smartphone. O scan below QR code to get the APP.
App Store
2. Register Account
Open the "Wansview Cloud" APP and register an account with your email and activate it
Tips: Your password must be 8-16 characters, and contains at least the following three
categories: numbers, uppercase letters, lowercase letters, or special characters.
3.Add B4 Camera
@ e T
Click "Add device” or 2 Select the B4 camera 3 Press the power
button to turn iton
5 Press the Reset
button for 3s to enter
pairing mode
5 WiFi setup
(Connect to 2.4Ghz WiFi)
® Scan the QR code

Wansview B4 Specifications

General

Brand	Wansview
Model	B4
Category	Security Camera
Language	English