Wap 1100 - Specifications

16
Pressure regulator not
set to low pressure
VarioPress control knob
not set to low pressure
Problem Cause Remedy
No cleaning agent
sprayed
Set pressure/volume
regulator on the cleaner
to maximum pressure
Turn the VarioPress
control knob towards
„+“ up to the stop
SPECIFICATIONS
Wap 1100 W Wap 1100 Wap SILVER Wap SILVER W
Working pressure bar 140-10 160-10 205-20 115-10
100-10 (CH)
120-10 (GB)
Volume flow l/h 600 780 810-250 600-250
Voltage 110 V 1~ - - - EU, ZA
Voltage 220 V 1~ KR - - -
Voltage 230 V 1~ EU, ZA, CH - - EXP
Voltage 230/240 V 1~ GB - - GB
Voltage 200 V 3-phase AC - - - -
Voltage 220 V 3-phase AC - - - -
Voltage 230 V 3-phase AC - - BE, NO -
Voltage 380 V 3-phase AC - - ZA -
Voltage 400 V 3-phase AC - EU,FR EU, FR -
Voltage 400-415 V 3-phase AC - AU - -
Frequency Hz 50 50 50 50
60 (KR)
Connected electric load kW 3.5 4.9 6.4 2.9
2.25 (CH)
2.9 (GB)
Max. inlet temperature °C 60°C (50°C in suction mode)
Max. water supply pressure bar 10 10 10 10
Dimensions LxWxH 390x290x860 390x290x860 650x402x885 650x402x885
Weight of cleaner
(Weight of spraying device) kg 29 (4) 29 (4) 53 (5) 52 (5)
Sound pressure level measured
1 m from the cleaner in
accordance with DIN 45635 dB(A) 76.6 81.0 80.4 68.6
Oil fill capacity l 0.22 0.22 0.35 0.35
Cleaning agent tank capacity l 4 4 10 10
Recoil forces N 28 39 46 23
Please note the specifications given on the rating plate!