EC Declaration of Conformity
[B2000171_1] - EN / 20.12.11 Page 11 of 12 Subject to change without notice.
9 EC Declaration of Conformity
EC Declaration of Conformity
The product:
WAREMA black-out blind ZIP
Type: ZIP VDA
Purpose: Internal sun shading systems
Meets the provisions of Machinery Directive 2006/42/EC in the case of motor drives.
In particular, the following harmonised standards were used:
DIN EN 60335-2-97
Household and similar electrical appliances - Safety - Part 2-97: Particular require-
ments for drives for rolling shutters, awnings, blinds and similar equipment
The safety objectives of Low Voltage Directive 2006/95/EC were guaranteed according to Appendix I No. 1.5.1.
of Directive 2006/42/EC.
Person in charge of the compilation of the technical documents: Ralf Simon, for address, see manufacturer.
Manufacturer: WAREMA Renkhoff SE
Hans-Wilhelm-Renkhoff-Str. 2
97828 Marktheidenfeld
Germany
Harald Freund Ralf Simon
Executive Vice President Operations Head of Research and Development
Marktheidenfeld, July 2011
To Next Page
Loading...