6
6. When nished blending, set toggle switch to OFF
position.
7. Allow motor to come to a complete stop before
removing container from blender base. Never place
the container on the motor base or remove it from
the motor base while motor is running.
8. Always hold container with one hand when starting and
while blending. Never operate without jar lid.
9. Wash and dry container after each use. See Cleaning
and Sanitizing Instructions.
10. Unplug to turn off all power to blender.
CLEANING AND SANITIZING INSTRUCTIONS
THE CONTAINER MUST BE CLEANED AND DRIED AFTER
EACH USE OF THE BLENDER ACCORDING TO THE
FOLLOWING INSTRUCTIONS.
FAILURE TO DO SO MAY ALLOW RESIDUE OF
PROCESSED MATERIAL TO COLLECT ON THE INTERNAL
SEALS OF THE BLADE ASSEMBLY, RENDERING THEM
INEFFECTIVE.
• Wash, rinse, sanitize and dry container prior to initial use
and whenever it will not be used again within a period of
1 hour.
• Wash and rinse container and blade assembly after
each use.
• Clean and sanitize motor base prior to initial use and after
each use.
• Washing solutions based on non-sudsing detergents and
chlorine-based sanitizing solutions having a minimum
chlorine concentration of 100 PPM are recommended.
To Next Page
Loading...
Need help?
General
