6
ASSEMBLy:
STEP 1
Insert the splashguard onto the bowl (ensure all clips on the
cover are fully inserted into the holes on the bowl).
STEP 2
Insert the bowl and splashguard on the motor base. Make
sure the bowl is pushed all the way down to meet the base,
then turn clockwise to lock the bowl on the motor base.
STEP 3
Insert the oss head on the motor base; ensure the shaft
of the container is locked by the perpendicular shaft on the
motor axis.
IMPORTANT NOTICE
When lifting cotton candy maker from table or counter top,
do not use cone holders located on each side of unit. Cone
holders are for storage only.
To lift safely, place one hand on each underside of the
cotton candy maker and lift upwards to release suction feet.
To Next Page
Loading...
Need help?
General
