3
PARTS AND ACCESSORIES
1. Switch
Has three functions: HI, OFF and LO. Plug the power
cord into proper wall outlet, then press up to the
HI position. The rollers will begin to heat and turn.
The red light will illuminate to indicate the unit is on.
When OFF is pressed, the unit stops working, and the
light turns off. LO is used to keep hot dogs warm and
for cleaning.
2. Drip Pan
The drip pan is used to catch oil and pieces from the
roasted hot dogs.
HOW TO USE
1. After initial preheating and before rst use, follow the
steps below.
2. It is recommended to preheat grill for 5 to 8 minutes
before adding hotdogs.
To Next Page
Loading...
