IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING,
TEMPERATURE OF WASHING SOLUTION AND RINSE WATER MUST
NOT EXCEED 115˚F (46˚C), AND QUANTITY USED MUST NOT EXCEED
ONE-QUARTER CONTAINER FULL.
IF HIGHER TEMPERATURES OR LARGER QUANTITIES ARE USED,
OBSERVE ALL PRECAUTIONS GIVEN IN THE OPERATING MANUAL UNDER
“HOT BLENDING INSTRUCTIONS”, page 6.
TO SANITIZE AND DRY CONTAINER
Wipe down exterior of container with a soft cloth or sponge dampened
with sanitizing solution.
Fill container with sanitizing solution, cover, place on motor base, and
run on high speed for two (2) minutes. Empty container. Dislodge any
residual moisture from blade assembly by placing empty container on
motor base and running on high speed for two (2) seconds.
Sanitize lid and lid insert by immersing in sanitizing solution for two
Do not rinse container, lid, or lid insert after sanitizing is completed.
TO CLEAN AND SANITIZE MOTOR BASE
UNPLUG POWER CORD. Wipe down exterior surfaces of motor base
with soft cloths or sponges dampened with washing solution, rinse
water, and sanitizing solution. Prevent liquid from running into motor
base by wringing all excess moisture from cloths or sponges before
DO NOT IMMERSE MOTOR BASE IN WASHING SOLUTION, RINSE WATER
Allow motor base to air-dry before using.
Refer to the list of Authorized Service Centers enclosed with your Waring
Commercial Blender for the name of the nearest Service Center, or
Waring Factory Service Center
314 Ella T. Grasso Avenue
Ship blenders for repair to the above address or to an Authorized Service
Center. Do not ship to a Waring Sales Office.
Note: If your application involves the processing of biologically active
material, we request that any items returned for service be sterilized
before being shipped. Such items must be clearly identified as having
To Next Page
Loading...
