3
IMPORTANT UK WIRING INSTRUCTIONS
This appliance is supplied with a fitted plug; however, for
your information, should you wish to change the plug, the
wires in the mains lead of the appliance are colored in
accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
Warning: The severed plug should be disposed of to avoid
a possible shock hazard and should never be inserted into
a 13A socket. As the colors of the mains lead of this
appliance may not correspond to the colored markings iden-
tifying the terminals in your plug, proceed as follow: the wire
which is colored Green & Yellow must be connected to the
terminal in the plug which is marked with the letter E or by
the earth symbol or colored Green or Green & Yellow.
The wire which is colored Blue must be connected to the
terminal which is marked with the letter N or colored Black
or Blue. The wire which is colored Brown must be connected
to the terminal which is marked with the letter I, or colored
Red or Brown.
Note: If the terminals of the plug are unmarked or if you are
in any doubt, consult a qualified electrician. If a BS1563
Fused Plug is used, this must be fitted with the correct
amperage fuse - 3Amp fuse.
IMPORTANT: HOT BLENDING INSTRUCTIONS
To minimize possibility of scalding when blending hot
ingredients, the following precautions and procedures must
be observed:
1. Limit amount of material processed to one cup (8 oz.)
(0.236 liters).
2. Completely remove the lid insert of the two piece
container lid before starting motor. (This will allow
To Next Page
Loading...
Need help?
General
