GROUNDING INSTRUCTIONS
For your protection, your drink mixer is provided with a
3-conductor cord and a grounding type plug.
Always plug the mixer into a grounding-type outlet. Do not
defeat the grounding capability of the provided cord set.
If a grounding-type outlet is not available, one must be
installed by a licensed electrician in accordance with your
local electrical code before your mixer can be used.
HOW TO USE YOUR DRINK MIXER
1. Clean the drink mixer thoroughly before initial use.
2. Use the control switch to turn the unit “OFF” (O) or to
select either Low (I) or High (II) speed. Always set the
control switch to “OFF” (O) before plugging in the
mixer.
3. Plug the drink mixer into a properly grounded outlet.
4. Put recipe ingredients into the mixing cup. (Do not fill
beyond the top fill mark on the side of the mixing cup,
which represents 1 3/4 cups (420 ml). This will help to
prevent the mixture from splashing out during mixing.)
5. Attach the mixing cup to the drink mixer by sliding
the lip of the mixing cup up under the cup holder
and setting the bottom edge of the mixing cup on
the cup rest.
6. Only operate the drink mixer when the mixing cup is
attached.
3
To Next Page
Loading...
Need help?
General
