rinse water. Turn the unit off (O) again, empty the
mixing cup, and allow it to dry.
4. Unplug the drink mixer before cleaning the outside of
the unit.
5. Clean the outside of the unit by using a cloth moist
-
ened with a mild soap and water solution. Rinse the
cloth and wipe the unit again. Prevent liquid from
running into the housing by wringing all excess mois-
ture from the cloth before using it. Wipe the housing
dry after rinsing.
Do not immerse the unit in water or any other
liquid.
MAINTENANCE
MOTOR: The motor requires no greasing or oiling.
Sealed-in lubrication gives the unit lifetime, smooth
operation.
HELPFUL HINTS
1. Always be sure the control switch is in the off (O)
position before plugging in the drink mixer and before
removing the mixing cup when mixing has been
completed.
2. For best mixing results, add wet recipe ingredients to
the mixing cup before dry recipe ingredients.
3. The mixing times of beverages containing ice cream-
type ingredients will vary according to the hardness
of the ingredients. Softer ingredients work better.
4. If your recipe calls for ice, use only crushed ice in the
drink mixer.
5. Do not mix hot ingredients with your drink mixer.
6. Operate the drink mixer only when the cup is
attached.
7. In general, start mixing on low speed for about
3 seconds. Finish mixing on low speed if all your
5
To Next Page
Loading...
Need help?
General
