line level, transformer
balanced input
600 ohms impedance pin 2/tip=positive, pin
3/ring=negative, pin 1/sleeve=ground
line level, transformer
balanced output
600 ohms impedance pin 2/tip=positive, pin
3/ring=negative, pin 1/sleeve=ground
frequency response +/- 1 DB, 15 HZ TO 20KHZ
maximum gain +40 dB ±1dB
maximum peak reduction -40 dB ±3dB
input level +16 dB maximum
output level +10 dB nominal, +16 dB maximum
distortion Less than 0.1% THD at ±10 dBm
noise -74dB
attack time 10 milliseconds
release time 0.06 seconds for 50% release; 0.5 to 5 seconds
for complete release
tube compliment 2x 12AX7, 1x 12BH7, 1x 6P1 (compatible with
6aQ5, 6005, and 6N1N)
optical attenuator Kenetek T4B module (socketed) (compatible with T4A,
T4B, and T4C modules per standard wiring
configuration to standard octal header
power 115/230 volts (switchable), 50/60 Hz,
standard IEC 3 conductor cord
fuse compliment 1x 250v, 1amp fast-blow type fuse
dimensions 19” Rackmount chassis, 2U. 19” x 7” x 3.5”
weight 12 lbs
To Next Page
Loading...
