Need help?Do you have a question about the Warmhaus Minerwa 25 System IE and is the answer not in the manual?
General| Power Output | 25 kW |
|---|---|
| Heat Exchanger Material | Stainless Steel |
| Mounting | Wall-mounted |
| ErP Heating Efficiency Class | A |
| Max Operating Pressure | 3 bar |
| Flue Diameter | 60/100 mm |
| Ignition Type | Electronic |
| Fuel Type | Natural Gas |
Requirements for competent installation, adherence to instructions, and safety.
Guidelines for installer interaction with the customer regarding product operation and support.
Overview of the MinerWa 25 System Boiler's features and efficiency.
Critical warnings and precautions for safe installation and operation.
Requirements for new build dwellings regarding heating systems.
Requirements for existing dwellings and system upgrades.
List of items included in the boiler packaging for installation.
Diagram and identification of the boiler's main components.
General criteria for the heating system to ensure compatibility and safety.
Requirements for adequate ventilation for the boiler installation.
Importance of cleaning the heating system to prevent damage and warranty issues.
Instructions for safely unpacking the boiler unit.
Guidance on selecting the correct position and ensuring stability.
Instructions for using the template for accurate drilling and mounting.
Steps for safely drilling the necessary hole for the flue.
Procedure for securely fixing the boiler's mounting bracket to the wall.
Steps for safely lifting and attaching the boiler to the mounting bracket.
Procedure for accessing and adjusting boiler parameters via the TSP menu.
Important warnings and details regarding parameter values and their effects.
Step-by-step guide for automatic boiler calibration using a flue gas analyzer.
Crucial checks to ensure the flue system is correctly installed and sealed.
Procedure to verify the gas supply pressure is within operational limits.
Method for checking gas joints for leaks while the appliance is operating.
Procedure for verifying the correct gas rate for efficient and safe operation.
Initial steps for safely accessing and preparing for component replacement.
Final steps after component replacement, including safety checks.
Procedure for safely draining the central heating circuit for maintenance.
Procedure for draining the domestic hot water circuit in combi boilers.
To Next Page
