What to do if my Warmhaus EWA 2525C Boiler shows error E 02?
If your Warmhaus Boiler displays error code E 02, it indicates that the water pressure is too low. First, fill the boiler to reach a pressure of 1.2-1.5 bar as indicated in the manual. Check the system pressure on the LCD screen to ensure it reads between 1.2 and 1.5 bar. Then, reset and restart the boiler. If the problem continues, contact an authorized service for assistance.
What to do if my Warmhaus EWA 2525C Boiler shows error E 03?
If your Warmhaus Boiler shows error E 03, it means the water pressure is too high (above 2.8 bar). First, verify that the boiler's filling tap is completely closed. During operation, ensure the safety valve is connected to a drain line in case it drains water. If your plumbing has a drain cock, turn off the boiler, allow the pressure to drop to 1-1.5 bar, and then turn it back on. If the pressure continues to increase, contact an authorized service.
How to fix Warmhaus EWA 2525C error E 01?
When your Warmhaus Boiler displays error code E 01, it indicates a fault with the flue sensor. Try resetting and restarting the boiler. If the issue persists, call an authorized service for assistance.
Provides essential safety instructions, warnings, and guidelines for operating the appliance correctly and safely.
Details the manufacturer's warranty, terms, conditions, and specifies situations where the warranty may be voided.
Lists boiler gas types, supply pressures, used gas, and the countries where the appliance is approved for use.
Outlines critical steps to take if a gas leak is suspected, including immediate actions and emergency contact information.
Crucial safety advice for users covering boiler usage, maintenance, electrical safety, and general precautions.
Explains the connection and operation of optional room thermostats for enhanced heating control and programming.
Details how to connect and utilize an optional external sensor for weather-compensated heating control.
Covers adjustable parameters like ramp-up time, child protection, and deaeration function for personalized operation.
Provides a comprehensive list of error codes, their potential causes, and recommended solutions for diagnosing issues.
Offers practical advice on optimizing boiler efficiency, fuel consumption, and heating comfort for cost savings.
Specifies critical issues and conditions that can lead to the voiding of the product's warranty.
To Next Page
General