WARRIOR 58523 - User Manual

To Next Page

Visit our website at: http://www.harborfreight.com

Email our technical support at: productsupport@harborfreight.com

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back

of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep

this manual and the receipt in a safe and dry place for future reference. 21j

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2021 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

To ols required for assembly and se rv ic e m ay n ot b e i nc lu de d .

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Main Page

Need help?

Do you have a question about the WARRIOR 58523 and is the answer not in the manual?

The device described in the manual is the WARRIOR 18V LITHIUM-ION IMPACT DRIVER KIT, a cordless power tool designed for driving fasteners and drilling holes. It is intended for general power tool applications, offering portability and freedom from a power cord due to its battery operation.

Function Description:

The Impact Driver is primarily used for inserting and removing screws and bolts, and for drilling holes. Its impact mechanism provides additional torque when resistance is met, making it effective for tough fastening and drilling tasks. The tool features a variable speed trigger, allowing the user to control the speed based on the application. A direction switch enables both clockwise rotation (for driving/drilling) and counter-clockwise rotation (for removing fasteners). It also includes an LED light to illuminate the work area, enhancing visibility in dimly lit conditions. The kit includes the Impact Driver, an 18V Li-Ion Battery Pack, and a compatible 18V Li-Ion Charger.

Important Technical Specifications:

Charger: Warrior 64256 Li-Ion 18V Charger
Battery: Warrior 64256 Li-Ion 18V 1.3Ah
No Load Speed (n0): 0-3000/min (Revolutions per Minute)
Impact Rate: 3400 BPM (Blows per Minute)
Maximum Torque: 600 in-lb
Chuck Size: 1/4" Hex

Usage Features:

Cordless Operation: Powered by an 18V Lithium-Ion battery, providing mobility and convenience without the need for an electrical outlet during use.
Variable Speed Trigger: Allows precise control over the operating speed. Applying more pressure increases the speed, while lessening pressure decreases it. This feature is crucial for adapting to different materials and fastener types.
Direction Switch: A three-position switch controls the rotation direction (forward for driving/drilling, reverse for removing fasteners) and acts as a trigger lock when in the center position. The trigger lock prevents accidental starting, which is a key safety feature during setup, bit changes, or when the tool is idle.
LED Work Light: Automatically illuminates when the trigger is pressed, providing better visibility of the workpiece.
Easy Bit Installation: The 1/4" Hex chuck allows for quick and secure insertion of compatible driver bits.
Ergonomic Design: While not explicitly detailed, the manual implies a design intended for handheld use, emphasizing maintaining a firm grip with both hands to resist starting torque.
Battery Charging: The battery pack charges using the included charger. The red LED on the battery pack indicates charging status, turning off when fully charged. The manual advises allowing the battery to cool before charging and after charging before use.
Workpiece Security: Users are advised to secure loose workpieces with a vise or clamps to prevent movement during operation, ensuring safety and precision.
Environmental Considerations: The tool should not be operated in explosive atmospheres or wet conditions. Outdoor use requires an outdoor-rated extension cord for the charger, and damp locations necessitate a GFCI-protected supply.

Maintenance Features:

Regular Inspection: Before each use, the tool should be inspected for general condition, including checking for a leaking, swollen, or cracked battery pack, loose hardware, misalignment or binding of moving parts, cracked or broken parts, and any other condition that might affect its safe operation.
Cleaning: After use, external surfaces of the tool should be wiped with a clean cloth.
Storage: The battery pack, charger, and tool should be stored in a dry, indoor area, out of reach of children, and away from metal objects to prevent shorting.
Battery Care: The battery pack should be kept dry and protected from physical abuse (dropping, puncturing, short-circuiting, incineration) and extreme temperatures (above 265°F). Only the specified charger should be used, and damaged battery packs should not be charged or used.
Troubleshooting: The manual provides a troubleshooting guide for common issues such as the tool not starting, operating slowly, decreased performance, excessive noise/rattling, and overheating. Solutions range from ensuring proper battery connection and charge to replacing worn parts like carbon brushes or the battery pack, and allowing the tool to work at its own rate.
Professional Servicing: Repairs and parts replacements should be undertaken by certified and licensed technicians using identical replacement parts to maintain the safety of the tool. Users are cautioned against modifying or attempting to repair the power tool or battery pack themselves, except as indicated in the instructions.
Ventilation: The charger's ventilation ducts should not be covered, and it should be placed on a stable, solid, nonflammable surface during charging to prevent heat buildup and fire hazards.
Dust Management: For overheating issues related to blocked motor housing vents, users are advised to wear appropriate safety gear (ANSI-approved safety goggles and NIOSH-approved dust mask/respirator) while blowing dust out of the motor using compressed air.

WARRIOR 58523 Specifications

General

Brand	WARRIOR
Model	58523
Category	Impact Driver
Language	English