A
Angela RichardsonAug 9, 2025
Why won't my WARRIOR 6000S engine start?
- AAlison PopeAug 9, 2025
If your WARRIOR Portable Generator's engine won't start, several factors could be at play. First, ensure there's enough fuel by adding fuel if needed. Next, confirm that the switch is in the “ON” position. Also, check the oil level and add oil if necessary. If these steps don't work, the injection nozzle may be dirty or blocked, requiring cleaning or replacement. The high pressure fuel pump or injection nozzle might not be injecting fuel properly, in which case you should remove the injection nozzle and repair it or bleed the fuel injection system. Ensure the control lever is in the “RUN” position, and that you're starting the engine according to the correct operating procedure. Finally, if the battery is flat, recharge or replace it.