14
User manual
3.3 Additional functions
There is a menu with additional functions available for selection after start. When pressing the start button the menu
will appear on the display.
Select from the menu by pressing the up and down buttons and press the start button to activate.
Note!
Some of the functions may not be available or active on your machine.
Pause
It is possible to pause an ongoing program.
Select PAUSE and activate.
For some machines it is also possible to pause directly when pressing the start button.
When pressing the start button again the program will continue.
End a program
It is possible to end a program after start.
Select END PROGRAM and activate.
When pressing the start button the program will be ended.
Status
Select STATUS MENU and activate.
The status menu shows the status for inlet air temp, outlet air temp, RMC and heat for the machine.
To Next Page
Loading...
