WASD V3 - Indicator LED Programming; Entering LED Programming Mode; Programming Indicator Colors; Cycling RGB Colors

Indicator LED Programming
Action
LED State
1. Enable Pgm Key
Default position for Pgm key is RCtrl Key
Normal Function
2. Press Pgm + ScrLk to enter LED Programming
Flash green 3 times
3a. To program indicators:
Press the key of the target LED
(ie: Num Lock, Caps Lock, Scroll Lock)
Target LED displays current color
3b. To program Layer 1 – 4 indicators:
Press the Fn + layer key to program layer indicator color
(ie: Fn + m, Fn + , , Fn + . , Fn + /)
Flash red, then displays current color
4. Press Fn + F6, F7, or F8 to cycle through RGB colors
Target LED displays current color
5. Press Pgm to save color
Flash green 3 times
6. Go back to step 3 or press Pgm + ScrLk to exit LED Programming
Back to normal function