6
Factory Default
Chapter 5
Factory Default & Keyboard Connection
Use the Factory Default bar code to reset the scanner to the Default settings.
PC - A
T (PS/2) *
PC - XT
Notebook
The Keyboard Connection is used to program the Wasp WCS 3900/3905
scanner for the type of host computer.
*Default
Keyboard Connection
Factory Default
Continuous Scan Mode Enable
Scan this continuous scan mode barcode to enable continuous scanning. This
feature allows the scanner to be used with a stand for hands free scanning. The
trigger is functionless in this mode. To turn this mode off scan the default
barcode above.
Continuous Mode
To Next Page
Loading...