Page 2
Safety Information
Read carefully before installing:
• Always wear suitable protective gear (e.g. safety
goggles) when drilling holes, etc.
• Before drilling holes in walls, check for electricity cables
and water pipes.
• Shut off the power to the doorbell transformer before
you attempt to connect or remove it. Locate and shut off
the circuit breaker switch of your home's main electricity
supply.
• Before touching any wires, use a voltage sensor to check
that the power is actually off – the sensor will alert you if
the wires are still live.
Understanding the Wireless Chime
1. Halo LED / notification
2. LED dimmer
3. Tune selection
4. Ambient light sensor
5. Volume up
6. LED brighter
7. Volume down
1 5
4
6
7
2
3
To Next Page
Loading...