Wasserstein WTag - Getting Started Guide; Powering On and Off; Adding Your WTag; Locating Your WTag

Start Guide
1. Power On / Off
Press the center button to activate WTag
2. Add Your WTag
• Open the “Find My” app, select the “Items” tab and tap on
the “Add Item” icon.
• Choose “Other Supported Item” then tap “Connect” once
WTag is recognized.
• Enter a name for your device and choose an emoji to
represent it, then tap “continue”.
• Confirm your Apple ID. Tap “agree” and “finish” to proceed.
• Congratulations! Your WTag has been successfully set up and
is ready to use
3. Find Your WTag
• Open the “Find My” app, select the “Items” tab and choose
the item you are looking for.
• Tap on “Play Sound” to enable the beeping sound on your
WTag,.
• Once you have located your WTag, tap on “Stop Sound” to
stop the beeping.
page 4