Watchguard 4RE 2007 User Manual

WatchGuard Video ‐ Proprietary
WGD00080‐005Re
v
C Page 1 o
f
5


4RE2007‐2014TahoeBracketInstallat i onManual

Parts included with Bracket:
 1 – WGAP01459-001- Bracket 4RE,
Display, Chevy Tahoe, 2007+
 Screw Kit (WGP01459-HDW):
 (2) – 10x3/4” Hex (5/16” head) Self Drilling Screw (WGP01546-001)
 (2) – #8-32 1 ½ " Silver Phillips Machine Screws (WGP01545-002)
 **(2) – #8 x 1 -1/4" Black Phillips Self Drilling Screws (not used) (WGP01552-002)
Parts needed from 4RE system (in separate box):
 Touch Display Screen
 HDMI cable
 RAM Mount Kit (WGA00420)
Tools Required:
 Philips Head #2 Screwdriver
 Flat Blade Screwdriver
 Torx 15 screw driver
 10 mm socket wrench (for removing A Pillar handle)
 5/16” Socket wrench
 1/16” Allen Wrench
**Extra Screws not used in this installation
5/32
Allen
Screws
#8 x 1 and 1/4"
Self Drilling
Screws
#8-32 1 ½”
Screws
5/16
Hex
Screws

Watchguard 4RE 2007 Specifications

General

Brand	Watchguard
Model	4RE 2007
Category	Automobile Accessories
Language	English

Summary

Before Installation and Preparation

Routing the HDMI Cable

Route the mini HDMI cable from the overhead console through the headliner and A-Pillar to the 4RE system.

Mounting the Overhead Console Bracket

Securely attach the bracket to the vehicle's overhead console mounting points after removing the light cover and factory bracket.

Attaching the Bracket and Console

Securing the 4RE Bracket

Align the bracket with factory holes and attach it to the roof using Torx 20 screws and optional self-drilling screws.

Re-installing Overhead Console

Plug power back in, route HDMI, and reattach the overhead console using #8-32 x 1-1/2" machine screws.

Final Display and RAM Mount Assembly

Connecting Display Unit

Connect the mini HDMI cable to the display unit and re-install the cover after securing it with a 1/16th Allen wrench.

Attaching RAM Mount Components

Attach the RAM ball mount to the bracket using Allen screws, then attach the display to the RAM coupler.