Need help?Do you have a question about the Water Boss 550 and is the answer not in the manual?
General| Brand | Water Boss |
|---|---|
| Model | 550 |
| Category | Water Dispenser |
| Language | English |
Diagram illustrating the overall water softener installation layout and connections.
Visuals for plumbing connections and drain line setup, with installation tips.
Diagrams showing the bypass valve in both bypass and service positions.
Illustrations of overflow connection, transformer plugging, and related diagrams.
Images of the controller display and adding salt to the brine cabinet.
Guide to setting water hardness, understanding regeneration status, and using PowerClean.
Explanation of the waterMizer wheel and how to manually initiate regeneration.
Settings for High Capacity/Efficiency, Demand/Delayed mode, and 96-hour option.
Configuring units (gallons/liters) and the 12/24 hour clock for the controller.
Adjusting the unit's current time and preferred regeneration start time.
List of controller error codes (E1-E5) and basic troubleshooting steps.
Visual guide showing correct and incorrect methods for attaching the controller.
Detailed breakdown of parts for the main cabinet and connected assemblies.
List of parts for the injector assembly, crucial for water softener function.
Parts for the I/O adapter assembly, including turbine and sensor parts.
Detailed parts list for the drive end cap assembly, including motor and gears.
Components of the brine valve housing assembly, essential for brine delivery.
Parts for the safety shutoff assembly, including float and air check components.
Diagram and labels for the brine valve elbow assembly and its connections.
Components of the bottom fill plug assembly, including the plug and O-ring.
To Next Page
