Water Tech MC-1 - Filter Replacement Steps; Step 1: Detach Used Filter; Step 2: Drain System Base; Step 3: Install New Batteries

ENGLISH
2
ON OFF
ON OFF
FILTER REPLACEMENT
STEPS TO CHANGE FILTER
TURN OFF WATER BEFORE PROCEEDING!
A. Twist counter-clockwise,
B. Pull up and discard used MC-1 Filter.
Insert NEW AAA batteries into
System base.
Discard excess water
from System base.
Press RESET button for 5 seconds to
begin NEW Filter countdown.
Run cold water 5 minutes through System.
1
STEP
4
STEP
2
STEP
5
STEP
3
STEP
6
STEP
A
B
Remove BLACK CAP from NEW Filter.
A. Line up & place Filter key holes
to System. B. Twist clockwise to lock.
A
B
ENGLISH
“Red” screen =
CHANGE FILTER