Water Tech POOL BLASTER SPA VAC PLUS - Product Assembly and Maintenance; Battery Installation and Use; Cleaner Assembly Steps; Maintenance and Storage

(+)
(+)
(-)
(-)
3
Maintenance
Detach the Battery Chamber Cap
from the Battery Chamber and
remove batteries between uses.
You should remove and clean the
Filter Cone after each use.
Always store your cleaner in a cool,
dry indoor shelter.
Attaching the pole sections
1. Inserting the Filter Cone
2. Attaching the Nose Cap
1. Nose Cap
2. Filter Cone
3. Main Body
4. Battery Chamber
5. Gasket Seal
6. Battery Chamber Cap
7. Pole Sections (Set of 3)
The cleaner must always
be switched ON before
submerging in water.
Press here to open
Twist for
ON / OFF
-It uses 4-C cell batteries.
x3
P10AX022SS
English
1.
2.
End of Life Disposal / Recycling Directive
Please respect the European Union regulations and help to protect the environment.
Return non-working electrical equipment to a facility appointed by your municipality that properly recycles electrical
and electronic equipment. Do not dispose them in unsorted waste bins. For items containing removable batteries,
remove batteries before disposing of the product.
Environmental Recycling Programs USA
Environmental Program(s), WEEE European Directive
Help protect the environment.
• For use with Alkaline batteries ONLY. Do
NOT install Lithium-ion or rechargeable
batteries in this unit.