To Next PageTo Next Page
Need help?Do you have a question about the Waterco POOL HEAT PUMP and is the answer not in the manual?
General| Brand | Waterco |
|---|---|
| Model | POOL HEAT PUMP |
| Category | Swimming Pool Heater |
| Language | English |
Explains the meaning of Warning, Vital, and Important safety alert symbols used in the manual.
Details required water quality standards for pool heat pump longevity and operation.
Guidance on selecting the optimal location for the pool heat pump, including necessary clearances.
Details on correct water piping sequence and a visual plumbing diagram for installation.
Instructions for electrical connections, breaker size, and wire size, emphasizing safety.
Explains the importance of bonding all pool system metals and provides a bonding diagram.
Information on optimal atmospheric and water conditions for efficient initial pool heating.
Guidance on recommended operating hours for the pool heat pump for optimal heating.
Highlights the benefits of using a solar blanket to minimize heat loss and conserve energy.
Explains the defrost cycle activation conditions and duration for the pool heat pump.
Step-by-step instructions on how to start and stop the pool heat pump unit.
Procedure for programming the desired water temperature and switching between C and F.
Details the specific operation of the Reversible (XLR) electronic control, including defrost modes.
Guidance on interpreting error codes displayed by the electronic control.
Procedure for calibrating the pool heat pump's temperature reading to match a pool thermometer.
Explains how using a timer affects the pool heat pump's operation and heating effectiveness.
Information and warnings regarding the installation and use of a remote control.
Overview of internal safety controls that protect the pool heat pump's integrity and performance.
Instructions for adjusting bypass valves based on pool water temperature for optimal operation.
Instructions for cleaning the exterior surfaces of the pool heat pump unit.
Guidance on cleaning the evaporator coil to maintain efficiency and prevent warranty issues.
Mandatory steps for draining and preparing the unit for freezing temperatures to prevent damage.
Addresses issues where the unit is not working or the electronic control shows errors.
Diagnosing problems when the electronic control displays digits or specific codes.
Troubleshooting steps for scenarios where the fan blades do not move or start.
Diagnosing why the compressor might not start or operate correctly after the fan has engaged.
Addresses problems where the compressor starts and stops frequently or immediately.
Distinguishing between normal condensation and actual water leaks around the unit.
Identifying and resolving issues where ice forms on the evaporator coil.
Diagnosing why the pool heat pump is not effectively heating the pool water.
Tips and checks to prevent premature ice build-up on the evaporator coil.
A chart to record operational data for diagnosing heating performance issues.
Addresses issues related to the circuit breaker tripping unexpectedly.
Troubleshooting steps for identifying and resolving unusual noises from the unit.
Addresses differences between the unit's display and an actual pool thermometer reading.
Diagnosing problems related to the intake temperature probe connection or functionality.
Troubleshooting steps for the 'no water flow' error code, indicating insufficient circulation.
Explains the DEF code indicating a normal defrost cycle is active.
Addresses issues related to low refrigerant or a defective low-pressure safety control.
Diagnosing issues with low water circulation or a defective high-pressure control.
Troubleshooting for when the electronic control unit is off or potentially defective.
Diagnosing problems with the water temperature probe connection or functionality.
Addresses the 'ot' code indicating high water temperature within the unit.
Details what Waterco does not cover under warranty, including misuse and improper installation.
