3
Twist the filter base with the filter
top cover .
BLOCK
s
s
Operating Specifications
3
100
689
Storage and Maintenance
Replace your filter every 3 months or 320 gallons to prevent bacteria and fungus
growth in your filter, supply lines, and storage tank.
Keep your unused filter in a cool, dark, and dry place until you need them.
NOTE: Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system.
Installation and Replacement Procedures
A. The installation method of stainless-steel faucet filtration system is as follows:
B. The installation method of other faucet filtration systems is as follows:
Take out the new filter and press
it into the filter base . Ensure the
sealing ring is in place.
2
Twist off the filter base and
remove the expired filter.
Twist the Filter Base from the
Mounting Base.
Twist the filter top cover off and
take out the old filter.
Insert new filter into the filter base.
1
Switch the lever to the level
position and flush for 3
minutes.
4
MODEL: WD-FF-03A
To Next Page
Need help?
General
