Waterpik Express - Getting Started; Inserting Batteries

5
ENGLISH
GETTING STARTED
1
2
3
4
Inserting Batteries
1. Remove water reservoir.
2. Twist battery door le from the locked position to unlocked position and pull battery door away from the unit.
3. Insert 3 AA batteries as shown.
4. To replace battery door, line-up arrows, push and twist.
Replace batteries when performance is no longer eective. Typical battery life is at least 40 usages.
Important -
Use Petroleum Jelly to lubricate the battery cap sealing surface at every battery change.
Apply a thin even lm of Petroleum Jelly to the battery cap o-ring.
Apply a thin even lm of Petroleum Jelly to the battery compartment sealing surface.