Waterpik water flosser User Manual

Insert
1
1. Remove reservoir. 2. To remove battery door,
twist, and pull.
3. Insert 3 AA batteries.
Included
4. To replace battery door,
line-up arrows, push and
twist.
5. Insert tip rmly until it
clicks into place.
6. Fill reservoir with
warm water.
QUICK START GUIDE
Review full instruction book prior to first use
FIRST USE
©2016 Water Pik, Inc.Model WF-02

Waterpik water flosser Specifications

General

Pressure Settings	10
Water Reservoir Capacity	650 ml
Number of Tips Included	7
Power Source	Electric
Type	Countertop
Water Tank Capacity	650 ml
Pause Button	Yes
Color	White
Voltage	120V
Pressure Range	10-100 PSI

Summary

Waterpik Water Flosser Initial Setup

Prepare Water Reservoir and Batteries

Instructions for removing, filling the reservoir with warm water, and installing batteries.

Insert Water Flosser Tip

Guidance on firmly inserting the water flosser tip until it clicks into place.

Water Flossing Operation Guide

Start Water Flossing Procedure

Steps to turn on the unit, including placing the tip in mouth before activation.

Leaning Position for Use

Instructions to lean over the sink to manage water flow and prevent splashing.

Water Flossing Technique

Proper Aiming and Movement

Guidance on aiming the water jet at the gumline at a 90° angle and between teeth.