Waterpik WATERFLOSSER WP-450 User Manual

QUICK START GUIDE
1
3 4
OFF
Plug
in
Insert
2
Remove
Plug
Turn power
switch OFF, plug
power cord into
outlet, and insert
the charging cord
into the unit.
Lift the flip top on
reservoir and fill
with lukewarm
water. Refill as
needed.
Unplug
charging
cord from
unit prior to
filling with
water and
during use.
Select the appropriate
tip and insert into the unit.
Press firmly until the tip
clicks into place. To remove
tip, push the tip eject
button.
Caution: Do not
press tip eject button
while unit is running.
continued on back
To increase water
pressure move to
HI setting.
For first time use,
adjust the pressure
setting to the LOW
setting
Q
UI
C
G
UIDE
2
C
K
S
T
A
T
T
R
T
G
2
Model WP-450
LOW
Pressure
Setting
Charge Unit for 24 Hours
Prior to First Use.
Insert Tip:
Fill the Reservoir:
Usage:

Waterpik WATERFLOSSER WP-450 Specifications

General

Type	Cordless Water Flosser
Pressure Settings	2
Reservoir Capacity	7 oz
Tips Included	4
Color	White
Pressure Range	45 to 75 PSI
Pulses Per Minute	1450
Rechargeable	Yes
Battery	NiMH

Summary

Charge Unit for First Use

Insert and Remove Tip

Fill the Reservoir

Water Flosser Usage and Pressure

Pressure Setting

Adjust pressure from LOW to HI for desired water flow, starting on LOW for first use.

On/Off Procedure

Technique for Best Results

Water Stream Aim

Aim water stream just above gumline at 90 degrees for optimal cleaning.

Unit Positioning

Keep unit upright for continuous water flow during use.