waterpowered Hello Bidet - Package Contains; Installation

8
EN
USER MANUAL
PACKAGE CONTAINS::
• “Special Filter” bag (A1/A2) containing:
○
Special lter holder with internal thread (X)
○
Special lter holder with external thread (Y)
○
Aerator Filter (K)
○
Seal (W - with rectangular secon) for lter holder
with internal thread
○
Seal (Z - with “step-like” secon) for lter holder
with external thread
• Quick connector (B) with 3-meter spiral tube (C),
connector (D), handle/shower (E) with lever (F).
• Key for fastening/removing lter holders (G).
• Universal Addy adapter (O)*.
• Hello Bidet carrying case.
• Mul-language user manual.
Leers in parentheses refer to the main diagram.
*Included only with Hello Bidet Travel version.
WHAT IS HELLO BIDET
Hello Bidet is a handshower bidet that can be
conveniently and directly aached to your faucet
allowing you to enjoy the highest level of personal
hygiene while easily regulang water temperature
and pressure.
WHEN CAN IT BE USED?
Hello Bidet can be used instead of your normal bidet for
everyday cleansing and even when traveling.
SIDE EFFECTS
Hello Bidet will not cause any parcular side eects,
but with some cases of skin hypersensivity brought
on by irritaon, wounds, bruises, surgery and/or other
inammaons, the bidet use should be carried out with
cauon. With health condions that require special
aenon, please consult your physician before using
Hello Bidet.
WARNINGS
• For external use only: Hello Bidet should not be
used dierently than expressly indicated in the
manual.
• Contains small parts – keep out of the reach of
children!
• Before using Hello Bidet, check to make certain the
product and all parts are undamaged, and that it is
properly assembled;
• Be careful of the water temperature during use:
Hello Bidet can be used at any desired water
temperature by simply adjusng it directly
from the faucet. We recommend a warm water
temperature of 38° C / 100°F.
• Regulate the distance of the bidet handshower
from your inmate areas according to your skin
sensivity.
INSTALLATION
Installaon of Special Filter to faucet**
NOTE: The installaon of the lter holder to the
faucet should only be carried out when Hello Bidet
is connected. The special Hello Bidet aerator lter
should not be removed and reinstalled at every use
for it will not aect the normal funcons of the faucet
(Fig. 5), allowing airing, water savings and ltraon.
(The special Hello Bidet lter holder is adaptable to
all faucets of CEN - EN 226 norm). This standard is
commonly abided by all faucets with unscrewable
lter holders present on the market).
To connect the Hello Bidet lter (“special lter” bag)
to the faucet (sink, bidet, shower hose** or bathtub):
1 - Unscrew the lter holder from the faucet,
making certain the seal is also removed (g. 1). If
necessary, use the key (G).
2a - If the faucet has an internal thread (g. 2a), insert
the aerator lter (K) inside the special lter holder
with the external thread (Y) and place the seal with
the step-like secon (Z) on the aerator lter (g.
2a). Screw the lter holder to the faucet with the
just assembled (Fig. 3a) external thread (A1).
3a - If the faucet has an external thread (g. 2b),
insert the seal with the rectangular secon (W) and
the aerator lter (K) inside the special lter holder
with the internal thread (X)(g. 2b). Screw the lter
holder to the faucet with the just assembled (Fig.
3b) internal thread (A2).
4 - Completely screw on the assembled special
lter holder to the faucet with the quick
connector (B - g. 4) with dry hands and turning
counterclockwise.
** To connect Hello Bidet to the shower hose use the
mulfuncon connector (accessory sold separately -
see secon “Parts and Accessories”).
Hello Bidet can also be connected to the faucet via the
quick universal adapter “Addy” (O - included only with
the Hello Bidet Travel package and sold separately as an
accessory for the Basic version - see secon “Parts and
Accessories”) without unscrewing the lter holder from
the faucet. Perfect for travel.