Need help?Do you have a question about the WaterSoft AS24P and is the answer not in the manual?
General| Brand | WaterSoft |
|---|---|
| Model | AS24P |
| Category | Water Dispenser |
| Language | English |
Explains the process of water softening and ion exchange.
Lists essential checks before installing the softener, including water testing.
Specifies required conditions and location for unit installation.
Describes the primary parts of the water softener system (Brine Tank, Resin Tank, Control Valve).
Details criteria for choosing the softener's installation location and related requirements.
Outlines the step-by-step process for connecting the water supply and bypass valve.
Explains how to properly connect the drain line for the softener.
Details the connection of the brine line and overflow system for the softener.
Covers the necessary steps for connecting the unit to a power source.
Describes how to pressurize the system after installation and check for leaks.
Explains how to manually operate the control valve positions.
Guides on how to program the softener's regeneration frequency.
Explains how to use the bypass valve for various scenarios.
Describes how to manually initiate an extra regeneration cycle.
Explains how to interpret and use the capacity charts for softener sizing.
Details the specific programming steps for DS model control valves.
To Next Page
