EasyManua.ls Logo

WaterSoft ISOBAR II - WARNING; Lubricants; Sealants

WaterSoft ISOBAR II
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will cause
swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that Dow
Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound is used in the
manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended that
Teflon® tape be used to seal plastic Noryl® threaded fittings.
General
Specifications
CF10
CF10-3
CF13
CF13-3
Filter Media Smart-Blend Smart-Blend
Filter Media Capacity (cu. ft.) 1.5 2.5
Mineral Tank (Vortech) 10 x 54 13 x 54
Service Flow Rate - Continuous (gpm) 5 8
Service Flow Rate - Intermittent (gpm) 7 10
Backwash Flow Rate (gpm) 5 7
Gallons Used / Backwash 130 182
Space Required (D x W x H) in inches 10 x 10 x 62 13 x 13 x 62
Approximate Shipping Weight 142 lbs. 218 lbs.
Specifications

Related product manuals