Waterway NEO 1200 User Manual

NEO 1200NEO 1200
INSTRUCTION MANUAL
NEO 1100 CONTROL PANEL
SPA CONTROL SYSTEM
NEO 1000 CONTROL PANEL
The new standard
in Spa Control.
810-1980.1218 ©2018 Waterway Plastics
2200 E. Sturgis Road, Oxnard, CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
waterway@waterwayplastics.com • www.waterwayplastics.com
Designed,
Engineered &
Manufactured
in the USA.
C: 1.02

Waterway NEO 1200 Specifications

General

Brand	Waterway
Model	NEO 1200
Category	Control Systems
Language	English

Summary

Qualified Technician and Installation Requirements

Basic Installation and Configuration Guidelines

Essential guidelines for installing the spa control system and configuring its basic settings.

GFCI or RCD Protection

Importance and requirements for Ground Fault Circuit Interrupter or Residual Current Device protection.

CSA Compliance and Precautions

Requirements and precautions for complying with CSA standards for the spa control system.

Shock Hazard and Serviceability Warnings

Critical warnings about shock hazards and the absence of user-serviceable parts.

System Operational Modes and Navigation

Spa Accessory Operation and Timeouts

Setting Water Temperature

Detailed Settings Explanations

Heat Mode Configuration

Error Screens and Troubleshooting

Plumbing and Flow Errors

Diagnosing and resolving issues related to plumbing connections and water flow.

Temperature and Overheat Errors

Addressing errors caused by water overheating or heater malfunctions.

Sensor Fault Identification

Identifying and resolving issues related to sensor connections or failures.

Potential Freeze Protection

Wiring Diagram and Connections

Basic Controller Wiring Diagram

Input Connection Details