Waterway NEO 2100 - User Manual

SPA CONTROL SYSTEM
INSTRUCTION MANUAL
807-1930.0114 ©2014 Waterway Plastics
2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403
waterway@waterwayplastics.com • www.waterwayplastics.com
Designed,
Engineered &
Manufactured
in the USA.
12:34 pm
104
°
F
1

Summary

Qualified Technician Requirement for Service and Installation

Basic Installation and Configuration Guidelines

CSA Compliance and Safety Cautions

Shock Hazard and No User Serviceable Parts Warning

High Voltage Control Box Caution

Main Screen Overview

Main Screen Description

Displays current time, water temperature, and status of system accessories like LIGHT, BLOWER, and JETS.

Priming Mode Operation

Priming Mode Procedure

Spa Operation and Accessory Controls

Setting Water Temperature

Setting Screens Configuration

Error Screens and Troubleshooting

Plumbing Error

Error caused by incorrect SENSOR 1/3 connection. Swap plugs to resolve.

Insufficient Flow Error

Error due to no water flow through heater. Check connections and water levels.

Potential Freeze Error

Detects low temperatures; activates jets/blowers to prevent freezing. Shuts off when safe.

Waterway NEO 2100 Specifications