EasyManua.ls Logo

Waterwise 3200 - Preparing for First Time Use; Initial Cleaning Procedures

Waterwise 3200
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRODUCT SPECIFICATIONS
Rating 120 Volts / 60 Hz / 800 Watts
Filling Volume 1 gallon (3.8 liters)
Production Capacity .25 gallon/hour (.95 liter/hour),
6 gallons/24 hours (22.8 liters/24 hours)
Distiller will produce any amount up to 1 gallon per cycle.
If less than 1 gallon is wanted, ll kettle with desired amount.
Distiller will automatically shut o when no water remains in
kettle.
PREPARING FOR FIRST TIME USE
IMPORTANT: DO NOT immerse power cord, kettle or base unit in
water or liquid to avoid re, electrical shock and injury to persons.
Clean Kettle
1. Remove kettle from base unit.
2. Remove kettle cover by twisting counterclockwise, then lift.
3. Wash inside of kettle with soap and warm water.
4. Rinse thoroughly.
Clean Carafe
1. Remove carafe from base unit and remove lid.
2. Pull tab on bottom of lid to release carbon compartment
cover (g. B).
3. Wash carafe and cover with soap and warm water.
4. Rinse thoroughly.
Figure A
Reset
Carafe
w/Lid
Base
Unit
Kettle
w/Cover
Reset
Button
Indicator
Light
Waterwise 3200 Use & Care Guide 5