Watex CMS-8 - Specifications

WATEX Ltd., Latvia, Riga, Ganibu dambis 27 k-5, info@watex.eu, Tel. +371 67381989, www.watex.eu
4
SPECIFICATIONS
Technical parameters of
equipment
Unit
WATEX Model
CMS8
CMS9
CMS10
CMS12
CMS13
CMS14
Flow rate Q
max
m
3
/h
0.6
1
1.6
2.2
2.8
3.6
The amount of water for
regeneration (min)*
liters
100
130
156
200
250
300
The amount of water for
regeneration (max)
liters
189
288
428
596
743
1010
Softener Capacity ** (default set)
m
3
Resin tank size (diameter)
inches
8
9
10
12
13
14
m
0.2
0.23
0.25
0.3
0.33
0.36
Resin tank volume
liters
25
32
64
85
110
145
The amount of cationic resins
liters
15
25
40
55
70
100
Brine tank volume
liters
70
70
70
70
100
100
Dimensions
Length
m
0.53
0.56
0.59
0.64
0.84
0.87
Width
m
0.28
0.28
0.28
0.3
0.46
0.46
Height
m
1.14
1.47
1.62
1.57
1.62
1.91
Weight (filled with water)
kg
50
60
70
95
155
195
Connection in-out-drain
inches
1”-1''-3/4''
1 ¼”-1 ¼”-1''
Clack control unit
WSCI 1”
WS CI 1,25''
Filtration
Hardness, iron, ammonium
Resin tank material
FRP (fiberglass)
Brine tank material
PE (Polyethilene)
Filtering material
Cationic exchange resins, silica sand 1x3mm, 3x5 mm
Power consumption
Watts
3 W
*The amount of water for regeneration depends on water hardness and iron, turbidity, ammonium concentration.
** Softener Capacity depends on water hardness and iron, turbidity, ammonium concentration and should be calculated for each
water separately to get the best results and to reduce salt consumption and water for regeneration.
Please contact to your local dealer or WATEX to program the right capacity.
Important notes:
Softener does not remove smell, organics, bacteria or viruses.