EasyManua.ls Logo

Watts FloorStat 500650-120CS - Default Schedule; Modify the Schedule; Remote Input; Characteristics

Watts FloorStat 500650-120CS
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
. DEFAULT SCHEDULE
AUTO MODE ONLY
The 500650 FloorStat is preprogrammed with the following schedule:
Prog Setpoint* MO TU WE TH FR SA SU
8
2°F 6:00a 6:00a 6:00a 6:00a 6:00a 6:00a 6:00a
68°F 8:00a 8:00a 8:00a 8:00a 8:00a 10:00a 10:00a
8
2°F 5:00p 5:00p 5:00p 5:00p 5:00p 5:00p 5:00p
6
8°F 10:00p 10:00p 10:00p 10:00p 10:00p 11:00p 11:00p
*To modify the Comfort and Economy setpoints, see Temperature Setpoint.
This schedule is defined with the following Economy and Comfort
periods:
Comfort: 6:00a to 8:00a and 5:00p to 10:00p.
Economy: 8:00a to 5:00p and 10:00p to 6:00a.
The SunTouch 500650 controls the heating system according to the
setpoints defined in the four programs.
N
OTE:
T
o reset the 500650, press and hold , position switch to
Standby then to On. This will completely erase the schedule and any
modified setpoints.
8. MODIFY THE SCHEDULE
After 60 seconds of inactivity, the FloorStat will automatically exit
programming mode.
It is faster to program the same schedule for the entire week; then
modify the exception days.
See Temperature Setpoint for more information on how to modify the
Comfort and Economy setpoints.
You can program up to 4 different settings for each day of the week.
Prior to making changes, use this blank template to record your
personalized schedule:
P
rog Setpoint MO TU WE TH FR SA SU
___°_
___°_
___°_
_
__°_
Temperature format: o °F o °C
Time format: o 12h o 24h
Notes: __________________________________________________________
________________________________________________________________
________________________________________________________________
To modify, follow these steps:
1. Press PGM to access the programming mode
2. Press Day to select the day to be programmed (hold for 3 seconds
to select all days of the week).
3. Press PGM to select the Program No. (1, 2, 3, or 4).
4. Pr
ess
Hour and Min to set the time OR pr
ess
Clear to clear the
time (--:-- is disregarded).
5. Repeat steps 2 to 4 for remaining programs.
6. When completed, pr
ess
Mode/Ret to exit pr
ogramming mode.
Schedule Example:
This schedule is an example of the various possibilities:
Prog Setpoint
MO TU WE TH FR SA SU
82
°
F
5:00a 5:00a 5:00a 5:00a
5:00a 9:00a 9:00a
68°F 8:00a 8:00a 8:00a 8:00a 8:00a 12:00p 12:00p
82°
F
4:00p 4:00p 4:00p 4:00p 4:00p 8:00p 8:00p
68°
F
9:00p 9:00p 9:00p 9:00p 9:00p 11:00p 11:00p
REMOTE INPUT
The FloorStat is equipped with a remote input which allows connection
of a telephone controller or any other remote control system. When a
signal is received through this input, the FloorStat will automatically
switch fr
om normal operating mode to Vacation mode ( ), or vice
versa. Y
ou can, for example, heat your countr
y house from your office on
Friday
, or your house fr
om the airpor
t, or fr
om your car on your way back
from vacation.
CHARACTERISTICS
This FloorStat works differently than
a conventional electromechanical type.
The latter can have a differential of
temperatur
e up to 7.2°F (4°C) while this
electronic FloorStat has one of only
0.9
°
F (0.5
°
C). This slight oscillation
eliminates the discomfort often found with
conventional electromechanical thermo-
stats. The pr
opor
tional contr
oller deter-
mines the amount of power required by
the floor heating system to maintain the
desired temperature setting.
100%
80%
60%
40%
20%
To see this process, the display shows, in real time, the percentage of
power applied to the electric heating system.
Percentage (100% = 1 cycle)
CYCLES 20% 40% 60% 80% 100%
15 min. 3 min. 6 min. 9 min. 12 min. 15 min.
Example for FloorStat with 15-minute cycles:
For example, when the screen displays (which equals 40% or 6 min-
utes), then the heating system will be ON for 6 minutes, then OFF for
the remaining 9 minutes of the 15-minute cycle. The heating indicators
refresh when a new cycle starts.
TECHNICAL SPECIFICATIONS
Models (120 VAC): 500650-120CS, -120B, -120BH, and -120BW
Models (240 VAC): 500650-240CS and -240B
Display range: 32°F to 140°F (0°C to 60°C)
Setting range (ambient): 40°F to 86°F (5°C to 30°C)
Setting range (floor temp.): 40°F to 104°F (5°C to 40°C)
Comfort default: 82°F (28°C)
Economy default: 68°F (20°C)
Vacation default: 50°F (10°C)
Floor default temperature limit: 82°F (28°C)
T
emperature variation:
±
0.9°F (0.5°C)
Storage: –4°F to 120°F (–20°C to 50°C)
Temperature control: Proportional integral adaptive (analyzes the
system’s past cycles to optimize future commands), 15-minute
heating cycles.
MEMORY BACKUP
In the event of a power failure, an internal circuit will maintain the pro-
gramming. Only the time will have to be set if the power failure is more
than two (2) hours. The FloorStat will return to the same operating mode
as set before the power failure.
WARRANTY
WATTS RADIANT, INC. ONE (1) YEAR LIMITED WARRANTY
This product is warranted against material defects and workmanship
in normal use for a period of one year, from the date of the original
purchase from authorized dealers. During this period, Watts Radiant, Inc.
will repair or replace the product with a new or of equivalent quality at
Watts Radiant option, without charge, any product proven defective in
normal use.
W
ar
ranty does not cover transpor
tation costs. Nor does it cover a
pr
oduct subjected to misuse or accidental damage. This war
ranty does
not cover the cost of installation, removal or reinstallation.
This limited warranty is in lieu of all other warranties, obligations or
liabilities expressed or implied by the company. In no event shall Watts
Radiant, Inc. be liable for consequential or incidental damages r
esulting
from installation of this product. Some states or provinces do not allow
limitations on how long an implied warranty lasts, or the exclusion or
limitation of incidental or consequential damages, so the above exclu
-
sions or limitations may not apply to you. This warranty gives you
specific legal rights and you may also have other rights which vary from
state to state.
The defective pr
oduct and the original sale r
eceipt must be r
etur
ned to
the original dealer or shipped pre-paid, insured and addressed to:
Watts Radiant, Inc.
4500 E. Pr
ogr
ess Place
Springfield, MO 65803-8816
If you have any questions concerning the installation or programming of
this product, please call our technical assistance at 800-276-2419.
Watts Radiant, Inc. Programmable FloorStat 04/28/2006 920-115-010-00-1-A

Related product manuals