STEP 4
Slowly open downstream isolation valve to establish flow through
the system.
STEP 5
Adjust the Pressure Reducing Control to the desired pressure
setpoint by turning the adjustment screw IN, clockwise to increase
or OUT, counterclockwise to decrease downstream pressure (See
Figure 2).
Counterclockwise to DECREASE
downstream pressure
Clockwise to INCREASE-
downstream pressure
Figure 2
CP15 — Pressure Reducing Control
4 IOM-ACV-115-58_6115-58 2115 EDP# 1917039 © 2021 Watts
IOM-ACV-115-58_6115-58 2115 EDP# 1917039 © 2021 Watts 5
To Next Page
Loading...
