Need help?Do you have a question about the Wavemaster TWO NEO and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| Remote Control | Yes |
| Type | Stereo System |
| Amplifier | Class D |
| Inputs | AUX, Bluetooth, USB |
| Input Impedance | 10 kOhms |
Check contents after unpacking, including the instruction manual.
Guidelines for placing, maintaining, and safely operating the sound system.
Instructions for connecting and setting up the speaker system components.
Details on connecting various analog and digital audio sources to the system.
Connect analog audio sources using RCA or mini phono cables to LINE 1 or LINE 2 inputs.
Connect digital sources via optical TOSLINK or USB for stereo signals.
Guide on pairing and playing audio wirelessly via Bluetooth.
Information on using the remote control for system functions.
Instructions for opening the battery compartment and inserting batteries.
Overview of functions controllable via the infrared remote control.
Powers the device ON and manually forces OFF, affecting auto-ON function.
Activates/deactivates tone controls (BASS/TREBLE) without losing settings.
Activates/deactivates physiological sound correction for low volume listening.
Individually controls BASS and TREBLE levels in 5 steps, +/- 2 dB per step.
Resets sound settings to neutral zero position, affecting last or all settings.
Selects the playback source, similar to the knob function on the speaker.
Increases or decreases playback volume, similar to the knob function.
Mutes playback without changing volume; push again to unmute.
Information on proper disposal according to WEEE directive for used electronics.
To Next Page
